Place of Origin: | China |
Brand Name: | Dahometer |
Certification: | ISO CE |
Model Number: | DH-FV-01 |
Minimum Order Quantity: | 1 Set |
---|---|
Price: | negotiable |
Packaging Details: | Standard Export Wooden Case |
Delivery Time: | 7days |
Payment Terms: | T/T, Western Union |
Supply Ability: | 1000 Set Per Months |
Name: | New Flat Vulcanizing Machine For Belt And Tire Small Vulcanizer Machine | Working Mode: | Electric Heating |
---|---|---|---|
Hot Plate: | 350 × 350mm | Cylinder Stroke: | Max 300mm |
Cylinder Speed: | 11mm / S | Temperature Control Mode: | PLC Touch Screen |
High Light: | Belt Flat Vulcanizing Machine,Tire Flat Vulcanizing Machine,Small Vulcanizer Machine |
New Flat Vulcanizing Machine For Belt And Tire Small Vulcanizer Machine
Operation Method
1). First adjust the test machine horizontally, and use the level on the base of the machine, and adjust the basic screw according to the level indicator to make it level (adjust when installing the machine or moving the machine).
2). Start the main power switch and let the power supply pass through the control panels of the machine.
3). Set the test temperature.
4). Set the temperature of the upper, middle upper, middle lower and lower molds according to the requirements of the materials. After the temperature reaches the set temperature, open the cylinder door and place the stainless steel plate and the sample.
5). Start the test button to start the test on the hydraulic cylinder (do not adjust the pressure and speed of the hydraulic system).
6). The system automatically resets after the set time is reached.
7). Observe the sample and the test is over.
Precautions and maintenance
Precautions:
1).The display of this unit, the power of the motor is input according to the label.
2).The operator must be familiar with the operation and maintenance methods of this unit and pay attention to its use.
3).The environment should be kept clean and not wet.
4).When necessary, please pay attention to handling, do not damage the machine.
5).When replacing the jig, pay attention to pick and place, so as not to fall and bump the machine.
6).Regularly check the drive belt to see if it is looseness or not and adjust it.
7).Please apply for inspection calibration regularly to ensure accuracy.
1.Introduction
This series of flat vulcanizing machines are used in the main equipment for pressing and forming various rubber model products and non-model products. They can also be used to suppress all kinds of thermosetting plastics and foaming rubber and plastic products. With independent power mechanism and electrical system, centralized control with buttons. The working pressure and heating temperature can be adjusted within a certain range. This model is divided into manual and semi-automatic.
Technical Specification
1).Capacity: 5-30ton (adjustable)
2).Temperature range: normal temperature ~ 250 ° C
3).Temperature accuracy: ± 0.5 ° C
4).Temperature controller: PLC touch screen
5).Temperature control mode: PLC touch screen
6).Heating: electric heating tube heating
7).Working mode: electric heating. Heating method: electric heating
8).Heating time: about 15min from room temperature to 160 °C (heating speed adjustable)
9).Timer: PLC display, 0.01S ~ 999min ~ 999hr (adjustable)
10).Hot plate: 350 × 350mm (specially treated high hardness steel plate) electric heating water cooling.
11).Exhaust function: low pressure automatic exhaust one minute 3 to 10 times adjustable
12).Hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (made in Japan) drives high-performance electro-hydraulic with high-precision non-resistance cylinder piston to perform equal-rate control mode (stroke height can be set independently) with automatic pressure Compensation function, pressurization time can be preset, load force is strong, lifting is stable, automatic pressurization, pressure holding, pressure relief
13).Cylinder stroke: Max 300mm
14).Cylinder speed: 11mm / s
15).Pressure table: 0 ~ 200kg / sq.cm
16).Volume: (W × D × H) 1400 × 750 × 1460 mm
17).Power: 3 ∮, AC220V, 15A
18).Weight: about 350kg
Contact Person: Mrs. Julie Zhong
Tel: 86-13267004347
Fax: 86-769-2318-1253
DH - 300 Density Meter Plastic Granules AC 100V - 240V For PVC / PE Material
High Precision Digital Density Meter Constant Temperature Liquid Densimeter
Electronic Gold Purity Tester Digital Density Meter Gold Karat Purity Analyzer
Solid Liquid Powder Specific Gravity Meter , Chemical Density Measurement Device
Electronic Mechanical PC Control Tensile Compression Testing Machine
High Quality Hydraulic Pump Testing Machine , Universal Hydraulic Testing Machine 1000KN
Tensile Universal Testing Machine / Strength Testing Machine For Leather Rubber Plastic
WDW-2 Elongation Testing Machine / Single Column Wire Elongation Tester
High Precision Automatic Melt Flow Index Tester For Measuring Melt Mass Flow Rate
Digital Plastic Izod And Charp Pendulum Impact Tester Computer Controlled
Digital Cantilever and Simple Plastic Testing Machine / Beam Izod Impact Strength Tester
Computer Controlled HDT / Vicat Softening Point Apparatus Heat Distortion Testing Machine